WATERPIK Replacement Irrigator Nozzle Inaccessible Plate 2 units

WATERPIK Replacement Irrigator Nozzle Inaccessible Plate 2 units

WATERPIK Replacement Irrigator Nozzle for Inaccessible Plaque 2 units is indicated to eliminate the most inaccessible dental plaque.

It is designed with three thin strands of filaments to reach hard-to-reach plaque and is especially useful for people who have implants, crowns, bridges and other restorations.

Sold in a container with 2 nozzles differentiable by color.

WATERPIK Replacement Irrigator Nozzle Inaccessible Plate 2 units can be combined with:

• Waterpik® Ultra WP-100
• Waterpik® Traveler WP-300
• Wireless Waterpik® Plus WP-450
• Waterpik® Ultra Plus WP-160

It is advisable to replace the nozzle every 3 months to achieve optimal results, as soon as you notice wear on the filaments.

How you should use WATERPIK irrigators

You can use WATERPIK irrigators daily, especially every night after brushing.

Follow these steps:

1. Fill the reservoir with warm water and place it firmly on the base.
2. Choose the nozzle you need and place it on the handle.
3. Start with the lowest pressure setting, lean over the sink, and place the nozzle in your mouth.
4. Turn on the device.
5. Close your lips slightly to avoid splashing, but let the water flow from your mouth to the sink.
6. Direct the jet at a 90-degree angle toward your gums.
7. Regulate the pressure according to your needs.
8. When you are finished, turn off the device and press the nozzle ejection button.
9. Throw away the excess liquid and leave the tank empty.
10. For optimal results, start in the molar area (back teeth) towards the front teeth.
11. Continue along the gum line, pausing briefly between teeth until you have cleaned the inside and outside of the upper and lower teeth.

You can help combine this product with any other from our range of Irrigators or Electric Brushes for Dental Care.

Or if you prefer, you can click on the following link to View or Buy Waterpik Products