WATERPIK Replacement Nozzle with Brush 2 units

WATERPIK Replacement Nozzle with Brush 2 units

WATERPIK Replacement Nozzle with Brush 2 units is made up of a fixed head that allows the water injected by pulsations through the filaments to clean and rinse the surface of the tooth.

Designed to be able to brush your teeth and inject a stream of water at the same time.

You can use this replacement mouthpiece with or without toothpaste.

Sold in a container with 2 nozzles differentiable by color.

WATERPIK Replacement Nozzle with Brush 2 units can be combined with:

• Waterpik® Ultra WP-100
• Waterpik® Traveler WP-300
• Wireless Waterpik® Plus WP-450

It is recommended to replace the nozzle every 3 months to achieve optimal results, as soon as you notice wear on the filaments.

How to use WATERPIK irrigators

You can use WATERPIK irrigators daily, especially every night after brushing.

Follow these steps:

1. Fill the reservoir with warm water and place it firmly on the base.
2. Choose the nozzle you need and place it on the handle.
3. Start with the lowest pressure setting, lean over the sink, and place the nozzle in your mouth.
4. Turn on the device.
5. Close your lips slightly to avoid splashing, but let the water flow from your mouth to the sink.
6. Direct the jet at a 90-degree angle toward your gums.
7. Regulate the pressure depending on your needs.
8. When you are finished, turn off the device and press the nozzle ejection button.
9. Throw away the excess liquid and leave the tank empty.
10. For optimal results, start in the molar area (back teeth) towards the front teeth.
11. Continue along the gum line, pausing briefly between teeth until you have cleaned the inside and outside of the upper and lower teeth.

You can help combine this product with any other from our range of Irrigators or Electric Brushes for Dental Care.

Or if you prefer, you can click on the following link to View or Buy Waterpik Products